好吧，让我们开始这个新项目，我们必须在屏幕上制作一个小按钮，这实际上将是其输出。
All right so let's start this new project in which we have to make a small button on the screen which will actually be its output.

好的。
OK.

所以第一步是你必须在这里添加一些设备。
So the first step is you have to add some devices here.

我转到新设备，选择我的控制器，我们正在使用七千二百个代码到我的控制器，这是一个孩子将看到交流直流继电器。
I go to new device I select my controller which we are using seven twelve hundred code to my controller which is this one child will see AC DC relay.

这是我合适的型号。
This is my suitable model.

好的。
All right.

我将在我的设备上网本部分中添加此型号，并且我必须检查我的 IP 地址。
I will add this model in my device a netbook section and I have to check that my IP address.

你必须知道，我在以太网板中使用的IP地址是1 9 2 1 2 0 2，没错。
You must know that the IP address which I'm using in my Ethernet board is 1 9 2 1 2 0 2 right.

所以我想在繁忙时使用的是 1 9 2 1 6 0 3。
So the one which I want to use in busy is 1 9 2 1 6 0 3.

这是因为我正在使用它，它的地址是 1 和 2 1 6 0 1，所以我必须确保该 IP 地址不应该与其他 IP 地址冲突。
This is because I'm using it out and it's address is 1 and 2 1 6 0 1 so I have to make sure that the IP address should not conflict with other IP addresses.

好的。
All right.

所以我的电脑在这里，并且我的 IP 地址已配置。
So my PC is here with my IP address is configured.

现在我必须添加一个属于我的新设备。
Now I have to add a new device which is my.

在这种情况下。
In this case.

我要加400。
I'm going to add 400.

这就是模型。
And this is the model.

单击“确定”。
Click OK.

我不想有任何其他屏幕，所以我只需快速导航即可完成。
And I don't want to have any other screen so I will just quickly navigate to finish.

这就是我的问题。
So that's my issue.

现在我们回到设备网络。
So now we go back to device the network.

我想检查 vegemite 的 IP 地址。
I want to check the IP address of vegemite.

在本例中，我们使用 IP 地址。
In this case we're using the IP address for.

好吧，如果你想检查一下，我们可以验证这个 IP 地址。
All right if you want to check that begin we can verify this IP address.

我将转到我将关闭它，以便我可以访问设置。
I will go to I would shut down this my so that I can access the settings.

所以在设置中我可以看到一个网络接口。
So in the settings I can see a network interface.

所以这是五个。
So this is five.

我可以将其更改为也许四个。
I can change that to maybe four.

好的。
All right.

所以这是有道理的。
So this makes sense.

所以现在它也发生了变化，我必须确保它在这里。
So the it is change too for now I have to make sure it's for here.

现在亲爱的，这感觉是一种优势，我所要做的就是点击并破解。
Now darling this feels an edge my all I have to do is I have to just click and crack.

这就是你无法治愈的优势。
That's how you incurables an edge.

好的。
OK.

接下来我们必须转到我在美国的程序日志
So next this we have to go to my program log in the U.S.

如果我能做出一个简单的逻辑，我会再次添加一个逻辑。
and I will add a logic again if I can make a simple logic.

我们有它和 0.0.
We have it and 0.0.

我们有一个输出给你。
And we have an output going to you.

所以这一点实际上将终结硬币。
So this bit is going to actually end the coin.

现在我们必须在这个时代做到这一点。
Now this we have to make in the age of.

所以我会回到屏幕边缘。
So I would go back to my edge of my screen.

我将转到屏幕零中的屏幕零。
I will go to screen zero in screen zero.

我将制作一个按钮，这样我就可以从这里挖掘元素工具箱中所有开关的开关。
I will make a button so the button I can dig a switch from here all the switches in the toolbox of the element.

好的。
OK.

所以把开关放在这里。
So drop the switch here.

这些是预定义的开关。
These are the predefined switch.

我同意，我必须点击 PC 顶部的开关，才能在属性中单击开关的属性。
I would agree that sites I have to tap the switch for the PC top for that click in the properties the property of the switch.

我会拿走那个，这样它就在这里。
I will take that one so that one is here.

我的经纪人已经准备好了。
My agent is ready.

现在我们必须下载逻辑。
Now we have to download the logic.

好的。
OK.

所以首先我将下载我的逻辑年龄。
So first I will download the age of my logic.

在这种情况下，我只能顺从。
In this case I have to just conform.

又是IP地址，所以你的IP地址是我的。
It's IP address again so the IP address as far as your my is for.

我们正在使用它。
And we are using it.

如何确保这是一项技术，这是可以的，并且人们认为这是可以的。
How does one make sure this is tech this is OK and people see this is OK.

好吧，我会回到我的 PNC，让我们下载逻辑。
All right so I'll go back to my PNC and let's download the logic for us.

单击下载并立即开始搜索。
Click on download and start search now.

只是为了了解可能在我的电脑边缘通过路由器连接的信息，所以这是链接的。
Just for the information that might be in the edge of my PC are connected via a router OK so this is linked.

现在我必须这样做。
Now I have to at it.

现在该程序正在加载到我的电脑中。
Now the program is being loaded in the in my PC.

全部并单击加载。
All and click load.

所以PC上的加载逻辑需要一段时间。
So it will take a while for load logic in the PC.

好的。
OK.

所以逻辑是它已经准备好了，我可以监视它，看看它是否工作正常。
So the logic is it's ready I can monitor that to see if it is working fine.

看来这个还好啊。
Seems like this is fine.

那么让我检查一下。
So let me just check it.

是的。
Yeah.

如果我打开这个位我就会把它打开。
If I turn on this bit I'll put it on.

还行吧。
This is OK.

I'll go back to you know let's see if this can happen in the age of mice.

让我们转到屏幕零。
Let's go to screen zero.

现在我们必须将这个逻辑下载到麦克风中。
Now we have to download this logic in the mike.

所以，如果你点击下载，你必须搜索我的黑鬼，他们将在网络边缘搜索搜索老鼠，点击加载，你就可以在我的屏幕上看到。
So if you click download and you have to search for my niggas that will search the edge of the net for search mice here click load and you can see in the age my screen you can.

It like it again you can see the spot in it.

这表明正在传输数据。
And this is showing transferring this is transferring the data.

你可以很好地看到屏幕。
You can see the screen well.

现在是我以色列人的时代所以这是我的屏幕零点。
Now the age of my Israeli So this is my screen zeros.

那么我们来看看BNC锁。
So let's see the BNC lock.

这就是我的博客。
So this is my blog.

这就是我的优势。
So that's my edge of.

所以我现在必须去看屏幕，这样我们就可以这样进行。
So I have to go to screens now so we can go like this.

诺瓦克点击这个按钮。
Novak click this button.

如果我不打开这个，我的 Ogu 应该打开。
My Ogu should be on if I don't on this one.

您可以看到，这一点符合简单的逻辑，我们在我的元素中获得了带有此年龄标签的这一点，并且我们刚刚配置了 IP 地址。
You can see that this bit is on to the simple logic is we have got this bit with the tag of this age in my element and we have just configured the IP address.

因此，这是一个简单的逻辑，可以使用 my 上的简单开关来打开和关闭输出。
So this is a simple logic to do an on and off the output using a simple switch on the to my.

我希望这是有道理的。
I hope this makes sense.

现在接下来你会在我的边缘看到不同类型的元素，他们可以说。
Now the next you will see a different types of element on the edge of my they can said.

让我们举个例子。
So let's take an example.

我们必须了解如何使用 HMO 中的按钮。
We have to see how we can use a push button in the HMO.

我们在图书馆里看不到任何按钮。
We can't see any push button in the library.

您可以看到这里没有按钮。
You can see here there's no push button.

所以我们必须定义这个按钮作为普通按钮。
So we have to define this button to work as a push button.

那么让我们在下一个视频中看看如何做到这一点。
So let's see how we can do that in the next video.

谢谢。
Thank you.